单词ammeter
n.: 电流表；安培计
网络: 电表；安培表；电流计
安培计；电流表:
an instrument for measuring the strength of an electric current
〔物〕安培计
电流计
安培表
电流表,安培计
复数：ammeters
An instrument used to measure the flow of current in a circuit is called an ammeter.
用来测量电路中电流流量的仪器叫做电流表。
Since the voltage drop across the ammeter is negligible, essentially all the test voltage appears across R.
由于安培计上的电压降可以忽略，所以所有的测试电压都出现在电阻R上。
If the component or material breaks down, all the voltage would be applied to the ammeter"s input, possibly destroying it.
如果元件或材料发生击穿，全部电压都会加到安培计的输入端，从而可能将其损坏。
To start with, you need to break the circuit so that the ammeter can be connected in series.
开始时，你需要断开电路，以让电流表可以串入。
The guard can be used to isolate the high impedance input lead of the ammeter from leakage current due to voltage sources.
保护可以用来把安培计的高阻输入引线和由电压源引起的泄漏电流隔离开来。
To measure the offset of a switch card, connect the output of the card to a pico ammeter or electrometer.
若要测量开关卡的偏移电流，请将卡的输出连接到一台皮安计或静电计。
The protection circuit should be enclosed in a light-tight shield. The shield should be connected to the low of the ammeter.
保护电路应当做遮光屏蔽，且屏蔽要接到安培计的低压端。
Since the voltage burden of the electrometer ammeter or picoammeter is less than 1mV, the diodes won"t conduct.
由于静电计、安培计或皮安计的输入端压降小于1mV，这两个二极管不会导通。
To see how changes in source capacitance can affect noise gain, let"s again refer to the simplified ammeter model in Figure 2-15.
为了了解源电容如何影响噪声增益，再来看一下图2-15中的简化的安培计模型。
Connect the battery and ammeter to the starter as shown in the illustration.
按说明连接电池和安培计到起动机上。