单词crankshaft
n.: 曲轴；曲柄轴
网络: 机轴；曲轴箱；曲轴组件
曲轴；曲柄轴:
a long piece of metal in a vehicle that connects the engine to the wheels and helps turn the engine"s power into movement
【机械工程】曲轴,机轴
复数：crankshafts
Grinding as the crankshaft finishing processes, the location of the crankshaft, the surface roughness and the Beat has a great impact.
磨削作为曲轴精加工的工序，对曲轴的尺寸精度、形位精度、表面粗糙度和跳动都有极大的影响。
A crank arm is the offset portion of a crankshaft to which connecting rod and position are attached.
曲柄臂是曲轴连接臂，其中安装连杠和活塞。
And with custom-machined heads, custom camshafts and a billet crankshaft, it"s hard to argue you"re not getting your money"s worth.
与定制加工元首，自定义凸轮轴和曲轴坯，很难说你没有得到你的钱值得。
For the secondary forces to be in balance, the rods connecting the pistons to the crankshaft would have to be of infinite length.
为了平衡不受控制的力，连接活塞和机轴的杆不得不变得无限加长。
A system to reduce rotational speed variations of a crankshaft includes a controller, a braking device, and a control module.
一种减小曲轴转速变动的系统，包括控制器、制动装置和控制模块。
In this paper the dynamic optimum design was carried out for the crankshaft of a horizontal reciprocating emulsion pump with three pistons.
本文对矿用卧式三柱塞往复乳化液泵曲轴进行了动态优化设计研究。
Chongqing cinema Machinery Crankshaft Co. , Ltd. is one of the few most strong and professional crankshaft manufactures.
重庆歇马机械曲轴有限公司是国内实力雄厚、屈指可数的专业化曲轴生产企业之一。
The sump surrounds the crankshaft. It contains some amount of oil, which collects in the bottom of the sump (the oil pan).
机油箱包裹着曲轴。里面储藏着润滑油，润滑油保存在机油箱的底部（油盘油封座）。
The front-teeth time and the back-teeth time of the crankshaft are compared to find the missing teeth by gradient.
通过对比曲轴前后齿的齿时间，利用梯度找出缺齿。
The last is perfecting the old quality control flow of the crankshaft by adding the improved result.
最后，本文还对项目原有的质量控制流程进行了优化和完善，固化了改进成果。